Escala Absoluta

Reabilitação

Home thermal insulation: where to start the work

A cold home, mould and dripping windows? Why home thermal insulation should come before the heater, and how to plan the work in the right order.

Edgar Gonçalves

By Edgar Gonçalves, Architect · CEO and co-founder · Published on this site on

Enlarge image

November arrives and the pattern repeats itself in many Portuguese homes: the windows are wet in the morning, a dark patch appears in the bedroom corner, and the heater runs all evening without ever making the living room comfortable. In most cases, the problem is not the heater. It is the walls, the roof and the windows. Your home's thermal insulation determines how much of the heat you pay for stays inside, and that is where any work to improve comfort should begin.

The issue was back in the news this week. A Euronews report dated 16 November cites Eurostat data showing that 15.6% of Portugal's population could not keep their homes adequately warm in 2025. According to the National Energy Poverty Observatory, quoted in the same report, around 32% live with damp or mould problems.

Why so many homes are cold

João Pedro Gouveia, a researcher at CENSE at NOVA University, explains in the report that most of the housing stock was built before 1990, the year Portugal introduced its first thermal regulations for buildings. Even after that, he says, most homes were left with uninsulated walls and single glazing. For decades, the prevailing idea was that the mild climate made such measures unnecessary.

The result is felt at both extremes of the year. An uninsulated wall loses heat in winter and gets too hot in summer, especially in top-floor flats, where the roof receives sunlight all day. Buying a larger unit to compensate treats the symptom while leaving the cause untouched.

Damp and mould: what insulation can and cannot solve

Before discussing insulation, it is worth understanding what kind of damp is present. DECO Proteste distinguishes three sources: rainwater penetration, rising damp through capillary action, and condensation. Only the last is directly related to insulation.

Condensation occurs when water vapour produced in the home (from bathing, cooking and drying clothes) meets a cold surface. This is why it appears in corners, around windows, behind furniture placed against external walls, and on concrete beams and columns, which conduct heat away much more readily than the surrounding masonry. DECO identifies precisely these areas as signs of thermal bridging and inadequate insulation.

A roof leak or a wall drawing water up from the ground cannot be fixed with insulation. Painting over it with anti-damp paint will not solve it either, and DECO itself warns that this can make the problem worse. Many homes have more than one cause at the same time, which is why diagnosis must come before choosing a solution.

Home thermal insulation: where to start

The logical order is the same one Gouveia advocates in the report: first the passive elements (roof, walls and windows), then the equipment. A heat pump in a home that loses heat everywhere works harder and costs more to run than it needs to.

Roof and top floor

This is often the intervention offering the best results for the money spent. In an unused loft, insulating the loft floor is relatively straightforward. With an occupied top floor or a flat roof, the solution depends on what is already there: whether the roof has a lining, and whether the roof slab has waterproofing in good condition. If the waterproofing needs replacing, it makes sense to add insulation as part of the same work.

External walls

There are two approaches. External insulation wraps the façade, eliminates most thermal bridges at beams and columns, and does not take up space inside the home, but it changes the building's appearance. This may require prior approval from the local authority and, in a block of flats, a decision by the owners' association. Internal insulation can be installed flat by flat without depending on the neighbours, but it slightly reduces the usable floor area and is less effective at junctions with floor slabs and internal walls. If poorly detailed, it can even concentrate condensation elsewhere.

Windows and roller shutter boxes

Replacing windows is the improvement people most often seek, and it is easy to see why: it is quick, and the effect is immediately noticeable. But a new window fitted in an opening with an uninsulated roller shutter box, or installed without care at the junction with the wall, leaves a leak alongside an efficient frame. A very airtight home also needs a ventilation strategy. Without fresh air exchange, water vapour stays inside and condensation simply moves elsewhere.

How much it costs and what support is available now

Insulating walls and roofs is the most expensive part and receives the least support. According to the same report, thermal insulation accounted for just 1.5% of applications to the More Sustainable Buildings programme, and this work can easily exceed €10,000.

As for support, the latest development is the simplified procedure under Vale Eficiência II. According to the Environmental Fund, expressions of interest open on 23 November, but only for those who already have an eligible application awaiting a technical facilitator and have not yet received any vouchers. This is not a new round open to everyone. In the programme's general schedule, eligible improvements include energy-efficient windows, hot water and heating and cooling systems, and photovoltaic panels. Wall and roof insulation are not listed.

For most households, insulation work still has to be paid for out of pocket. All the more reason to do it once and do it properly, rather than tackling it piecemeal.

What a design project changes

Insulation work seems simple until you reach the details: the finish around the roller shutter box, the junction between the façade and the balcony, the thickness that will fit without throwing the window sills out of alignment, and the continuity of insulation where the wall meets the roof. These are the points that determine whether mould disappears or simply moves to another corner. A design project defines the solutions before work begins and makes it possible to obtain comparable quotes. Where changes to the façade are involved, it also addresses the approval process.

At Escala Absoluta, we handle this work as part of our rehabilitation and renovation services, with architecture and engineering disciplines coordinated within the same team. If you are not yet sure what steps a project like this involves, the journey to your home explains them, while the glossary helps with the technical terms you will encounter along the way.

Before buying another heater

If your home has mould that keeps returning to the same spot, windows that drip every morning, or a top floor that is unbearable in July, it is worth understanding the cause before spending money on equipment. Talk to us: we work from Figueira da Foz and Lisbon and can assess your home, identify thermal bridges and propose improvements in the right order.

Related content and tools